iQ8
Sadek Music for more information and to place your order for the iQ8 today! The 2,500-Watt iQ8 is a powered two-way loudspeaker ideally suited for a wide range of portable and fixed installation, music, and speech sound reinforcement applications. The driver complement includes an 8" low-frequency driver with a low-mass voice coil for improved transient response and a high-temperature 1" compression driver with a copper-clad aluminum voice coil for extended high-frequency reproduction.
Equipped with a very efficient and lightweight two-channel Klark Teknik Class-D power amplifier, the iQ8 provides an impressive 2,500 Watts of output power. A high degree of control over the loudspeaker system’s performance is managed by a sophisticated but easy-to-use Klark Teknik Digital Signal Processor (DSP), which provides dynamic EQ for remarkable full-range response at low volume levels and transparent limiting for the utmost clarity at high output levels—and long-term reliability. iQ8’s advanced DSP speaker modelling presets include detailed and accurate models of some of the audio industry’s most-respected loudspeakers.
Klark Teknik also developed a highly versatile Spatial Contour Control (SCC) DSP function, which allows the user to easily optimize the iQ8’s frequency response for the physical speaker placement. This advanced functionality provides frequency compensation for stand, floor, wall, or ceiling placement, much like the adjustments commonly found on studio reference monitors.
Elevate your sound at Sadek Music and experience the superior performance of the iQ8. On the rear panel amplifier module, you will find a fully featured user interface consisting of an LCD display, the Channel A and B gain controls, and a single rotary encoder for intuitive access to level, EQ, Speaker modelling, SCC, Subwoofer Integration and Feedback Control (FBI). In addition to the two combination balanced XLR/jack inputs, balanced XLR outputs for each of the two independent channels, and a Mix Out XLR connector, the iQ8 features a mic/line switch and level control with signal present LED on each channel.
The iQ8 also features our proprietary ULTRANET technology, which allows the use of CAT5 cables for transmitting pristine multi-channel audio signals and other information between ULTRANET-enabled products, such as digital mixers and personal monitor systems. This digital distribution networking not only eliminates the potential for RFI and crosstalk so common to analog methods but also significantly reduces the setup or installation time required. An onboard USB port provides access for remote control of the iQ8 via PC computer, as well as DSP and speaker modelling firmware updates.
Sadek Music for the iQ8 and experience next-level sound performance The lightweight fiberglass-reinforced composite enclosure is fitted with a rugged powder-coated perforated steel mesh grille and multiple internal rigging points for permanent installations. The iQ8 is also fitted with a dual-angle pole mount socket, allowing the enclosure to be pole-mounted straight on or raised and angled downwards for optimal audience coverage. Mains power input and link output are provided via Neutrik powerCON* connectors.
System
| Frequency Response |
60 Hz – 18 kHz ±3 dB
55 Hz – 20 kHz -10 dB |
| Nominal Dispersion |
90° H x 90° V @ -6 dB points |
| Maximum SPL |
128 dB peak |
| Crossover type |
Active |
| Transducers |
1 x 8" (208 mm) LF driver
1 x 1" (25.4 mm) HF compression driver |
| Limiter |
Independent HF, LF, peak and rms |
Amplifier
| Maximum output power* |
2,500 W |
| Type |
Class-D |
| Protection |
Short circuit, open circuit, thermal |
Connectors
| Input A / B |
2 x combo jack/XLR |
| Sensitivity |
Line +4 dBu, mic -22 dBu, switchable |
| Input impedance |
20 kΩ unbalanced, 40 kΩ balanced |
| Maximum input level |
+21 dBu |
| Output A / B |
2 x XLR Linked to input |
| Mix output |
XLR, balanced |
| Output impedance |
100 O unbalanced, 200 O balanced |
| Ultranet input/link |
2 x RJ45 |
| Mains Supply |
Neutrik powerCON input 20A and link 15A |
Controls
| DSP |
Rotary push-encoder Buttons for Process, Setup, Exit, Enter |
| Mixer section |
2 x gain controls (channels A and B) 2 x Line/Mic switch |
User DSP Functions
| Factory EQ presets |
Positioning, Sound mode, Sound modeling, FBQ |
| Display |
LCD 128 x 32, blue backlit |
| Delay |
0 - 300 ms |
| Equalisation |
High and low shelving EQ
2 x parametric EQ |
| Limiter |
Zero attack input limiter |
| Presets |
20 total presets, 19 user-definable |
| Crossover |
High Pass L-R 24 dB/oct |
| Protection |
Lock-out function for all settings |
Ultranet Digital Network
Power Supply
| Power consumption |
150 W @ 1/8 max power |
| Voltage (fuses) |
|
